You can set the receiver to turn off automatically
at a specified
time by using the remote.
For details, refer to the operating
instructions
supplied with the remote.
Press ALT, then press SLEEP on the
remote while the power is on.
Each time you press SLEEP, the display changes
cyclically
as l)llows:
2:00:00 ---* 1:30:00 ---* 1:00:00 ---* 0:30:00 ---*
OFF
While using Sleep Timer, "SLEEP"
lights tip in
the display.
"tip
To check the remaining time before the receiver turns
off\ press ALT, then pless SLEEP on the remote The
remaining time appears in the display.
You can select the front speaker system you
want to
tlse.
Press SPEAKERS
repeatedly
to select the
front
speaker system you want to use.
The selected
speaker system appears in the
display. To turn off the speaker output, press
SPEAKERS
repeatedly
nntil SPA and SP B
indication
turn oft'.
The
speaker
system
• SPA
The speakers connected
to the FRONT
SPEAKERS
A terminals.
• SPB
The speakers connected
to the FRONT
SPEAKERS
B terminals.
• SPA
SPB
The speakers connected
to both the FRONT
SPEAKERS
A and B tem_inals (parallel
connection).
In this case, be sure to connect
front speakers with a nominal impedance
of 8
ohms or higher, and set the IMPEDANCE
SELECTOR
to "4_Y'.
o
-'t
O
"O
0_
43G8