During Cd/Md - Sony XR-C2200 Operating Instructions Manual

Boosting the bass sound
D-bass
You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency and high frequency signal with a
sharper curve than conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
east, ' with the D-BASS control
]
0dB
_D BAS_ 3
• D BA_5 2
B_S 1
D BASS 3
D BASS 2
Frequency (Hz)
Adjusting the bass curve
Press _ repeatedly to select the
desired bass curve.
As the D-BASS number increases so does
the effect.
D.BASS-1 -'-* D.BASS-2 -"* D.BASS-3 --*
D.BASS-OFF
Note
The bass sound may distort at same volume. If the
bass sound distorts, select less effective bass curve.
With Optional Equipment
CD/MD Unit
Th_s umt can control a maximum of ten
external CD/MD untts m this configuratton'
CD umt - maximum of five
MD unit - maximum of five
Any combination up to ten will work.
If you connect an ophonal CD unit with the
CD TEXT function, the CD TEXT reformation
will appear m the display when you play a CD
TEXT d_sc.
Playing a CD or MD
1
Press _ repeatedly to select CD
or MD.
2 Press _ until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press _ during CD, CD
TEXT, or MD playback, the item changes as
follows'
Elapsed playback time
Disc name*_/Artist name*_
Track name *_
L
*' ltyou have not labeled the disc or if there is no
disc name prerecorded on the MD, "NO NAME"
appears in the display.
.2 If you play a CD TEXT disc, the artist name
appears in the display after the disc name
(Only for CD TEXT discswith the artist name.)
,3 If the track name of a CO TEXTdlsc or MD is not
prerecorded, "NO NAME" appears in the
d_splay.
12