Connecting To An S Video Input Jack - Sony BDP-S1 Operating Instructions Manual

___/ O IUSOt book Page
t_:_8_3N,,ifl_fS_,g_8_S t _i_jS 1\1024\2687794111 BDP-S1 (US) 1006\2687794111 BDPSI\01US05GET.fmmaster:Right
® Connectingto an S VIDEOinput jack
Conuect using an S VIDEO cord (not supplied). You will enjoy
high quality images.
Connect this player to your TV monitor, projector or AV
amplifier (receiver) using a video cord. Select one of the patterns
@ through (_), according to the input jack on your TV monitor,
projector or AV amplifier (receiver).
In order to view 1080p progressive signals with a compatible
TV, projector, or monitor with an HDMI input jack, you must
select pattern (_). You can use pattern (£) to view 480p/720p
progressive signals or 1080i interlace signals on a compatible
device with component video input jacks.
Blu-ray Disc player
to S VIDEO
S VIDEO cord (not supplied)
@ Connecting to a video input jack
Connect the supplied video cord (yellow) to the yellow (video)
jack. You will m\ioy standard quality images.
Blu-ray Disc player
(yellow)
Video cord (supplied)
: Signal flow
INPUT
t_ VIDEO
O(_L
_AUDIO
o_
TV, projector, or AV
amplifier (receiver)
_: Signal flow
TV, projector, or AV
amplifier (receiver)
@ Connecting to component video
inputjacks (Y, Pe,
PR)
Conuect the component via the COMPONENT VIDEO OUT jacks
using a component vide() cord (not supplied) or three vide() cords
(not supplied) of the same kind and length. You will enjoy accurate
color reproduction and high quality images. You can also enjoy
higher quality pictures frnm 480p/720p progressive signals or I080i
interlace signals, if your TV, prnjectnr nr AV amplifier (receiver) is
compatible.
VIDEO OUT
Blu-ray Disc player
€ID
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To
change the aspect ratio, see page 45.
Do not connect a VCR, etc., between your TV and the player. If you pass
the player signals via the VCR, you may not receive a clear image on the
TV screen. If your TV has only one audie/video input.jack, connect the
player to this jack.
Blu-ray Disc player Connect
directly
: Signal flow
Component video
cord (not supplied)
TV, projector, or AV
amplifier (receiver)
,_,continued
Step 2: Connecting the Video Cords/HDMI Cord 1 1
_i ) BDP-S1 (US) 2-687-794-11 (1)