Epson Stylus CX5400 Copy Manual page 8

When choosing a power source
❏ Use only the power cord that comes with this product. Use of
another cord may result in fire or electric shock.
❏ This product's power cord is for use with this product only.
Use with other equipment may result in fire or electric shock.
❏ Use only the type of power source indicated on the label on
the back of this product.
❏ Be sure your AC power cord meets the relevant local safety
standards.
❏ Do not use a damaged or frayed power cord.
❏ If you use an extension cord with this product, make sure that
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating. Also,
make sure that the total ampere rating of all devices plugged
into the wall outlet does not exceed the wall outlet's ampere
rating.
❏ If you plan to use this product in Germany, the building
installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and
over-current protection for this product.
When handling ink cartridges
❏ Do not open the ink cartridge packages until just before you
install them.
❏ Before installing the new ink cartridge, shake it four or five
times before opening its package.
❏ Do not shake the ink cartridge after removing from the
package; this can cause leakage.
2 Safety Instructions