Epson Stylus CX3800 Series Quick Manual page 21

1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is closed, then open the scanner.
Caution:
Do not open the scanner
when the document
cover is open.
3. Press and release the
check position and the P
low or empty, the Epson Stylus CX moves that cartridge to the
mark.
Note:
Don't hold down the
to clean the print head.
Caution:
Don't move the print head by hand; this may damage the Epson Stylus CX. Always
press the ink button to move the print head.
B
ink button. The ink cartridge holder moves to the
B
and ink lights flash. If one of the cartridges is
B
On
ink button for more than 3 seconds, or the printer will start
B
Maintaining Your Epson Stylus CX
ink out
_
21