Table of Contents
Advertisement
(;_IBLE
WITH
CONVERTER/
DESCRAMBLER
BOX OR StITELIJTI_
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection
shown here.
By using this connection
you can also record scram-
bled channels. However, channel selection must be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/VCR Remote Control. Unattended
timer record-
ing is limited to one channel at a time.
Satellite Box or
Cable Box (Not supplied)
From Cable System
or Satellite Dish
75-ohm Coaxial
Cable
(Not supplied)
i
ANT.
©
[Fig.7]
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter
Box or Satellite
Box. (Ex. CH3)
2.Select the channel to record from your Cable
Converter Box or Satellite Box.
l)Open the battery compartment
cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 "AA" penlight batteries into the battery
compartment
in the direction indicated by the
polarity (+/-) markings.
3)Replace
the cover.
C °o _
When using an external input signal (another VCR or
video camera), connect the player's audlo/video
out-
put cables to the AUDIO IN/VIDEO
IN jacks of
your TV/VCR. Then press the CHANNEL
• or •
button until "AUX" appears on the screen.
Aox
-II-
EN
9J27
Advertisement
Table of Contents
