VlZlOE422VA UserManual
Connecting
Your DVD Player
Using HDMI (Best)
DVD
DVD players that have a HDMI digital interface should be connected using HDMI for
optimal results. To maintain image quality, use a VIZIO certified HDMI cable. This cable
is available in 6, 15, and 30 foot lengths. Visit www.VIZIO.com
or call 877-MYVlZIO
(877-
698-4946) for details.
,
2.
,
4.
Note:
Turn off your HDTV and DVD player.
Connect a HDMI cable to the HDMI output of your DVD player and the other end
to the HDMI 1, 2, 3, or HDMI-4 jack on your HDTV.
Turn on the power to your HDTV and your DVD player.
Select HDMI-1, HDMI-2, HDMI-3, or HDMI-4 using the INPUT button on the remote control or
side of the TV.
•
The HDMI input on your HDTV supports High-bandwidth
Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
•
Refer to your DVD player user manual for more information about the video output requirements.
HDMI Connections
for DVD Players with DVI
,
2.
,
4.
5.
Turn off your HDTV and DVD player.
Using a HDMI-DVI cable, connect the DVI end to
your DVD player and the HDMI end to the HDMI
1, 2, 3, or HDMI-4 jack on your HDTV.
If signal source has left and right audio outputs (L and R), a 1/8" stereo audio
cable is needed, as shown in picture above.
Turn on the power to your HDTV and your DVD player.
Select HDMI-1, HDMI-2, HDMI-3, or HDMI-4 using the INPUT button on the
remote control or side of the TV.
Version 10/29/2010
25
www.VlZIO.com