Table of Contents
Advertisement
VlZtOVW32L HDTV10A UserManual
ImstaLLatiom
Preparatiom
Please read this user manual carefully before installing your VlZtO HDTV.
The power consumption
of the TV is about 180W, please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall.
tf you would like to mount your TV on the wall, please see
below 'Preparing Your LCD HDTV for Wall Mounting' for additional information.
Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation;
any 90 ° clockwise or counter-clockwise
installation may induce
poor ventilation and excessive component damage.
VlZlO offers professional
installation
services.
Please contact VlZtO for more information
on these
services at 888-VlZlOCE
(888-849-4623) or www.VlZlO.com.
Preparinq
Your
LCD
HDTW
WaLL Mountinq
The VlZtO VW32L can either be kept on the stand base or mounted on the wall for viewing,
tf you
choose to mount the VW32L on the wall, please follow the instructions below for removing the stand base.
To
remove
the
stand
base
1.
Unplug
all of the cables and cords
from your VW32L.
2.
Place the VW32L face down on a soft
and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3.
Remove the eight (8) screws holding
the base to the VW32L.
4.
Carefully remove the stand base.
To find
the
perfect
mount
for the
VlZlO
VW32L,
browse
VlZlO's
certified
mount
selection
at www.VlZlO.com
or call directly
888-VlZtOCE
(888-849-4623).
Version 2/6/2007
5
www.VlZlO.com
Advertisement
Table of Contents
