Remove The Processor From The Protective Cover - Intel DH61BE Product Manual

4. Remove the processor from its protective cover. Hold the processor only at the
edges, being careful not to touch the bottom of the processor (see Figure 9).
NOTE
Do not discard the processor cover. Always replace the processor cover if you
remove the processor from the socket.
Figure 9. Remove the Processor from the Protective Cover
5. Hold the processor with your thumb and index finger oriented as shown
in Figure 10 to align your fingers with the socket finger cutouts. Make sure that
the processor Pin 1 indicator (gold triangle) is aligned with the Pin 1 chamfer on
the socket (Figure 10, B) and that the notches on the processor align with the
posts on the socket (Figure 10, C). Lower the processor straight down without
tilting or sliding it in the socket (Figure 10, A).
Installing and Replacing Desktop Board Components
Figure 10. Install the Processor
35