Casio CFX-9970G User Manual page 439

The following shows what the displays of the sending and receiving units look like
after the data communication operation is complete.
Sending Unit
Press A to return to the data communication main menu.
u u u u u To send backup data
This operation allows you to send all memory contents, including mode settings.
While the send data type selection menu is on the screen, press 6 (BACK), and
the back up send menu shown below appears.
Press 6 (TRAN) to start the send operation.
The following shows what the displays of the sending and receiving units look like
after the data communication operation is complete.
Sending Unit
Press A to return to the data communication main menu.
• Data can become corrupted, necessitating a RESET of the receiving unit,
should the connecting cable become disconnected during data transfer.
Make sure that the cable is securely connected to both units before perform-
ing any data communication operation.
Performing a Data Transfer Operation
22 - 5
Receiving Unit
Receiving Unit
421