Casio Exilim EX-Z2000 User Manual page 16

[i-_-I] (PLAY) ---_ Snapshot Screen ---_ [MENU] ---_ PLAY Tab --* Dubbing
You can add audio to a snapshot after you shoot it.
You can re-record a snapshot's audio whenever you
want. You can record up to about 30 seconds of audio
for a single snapshot.
1.
Press [SET] to start audio recording.
.
Remaining recording time
Press [SET] again to stop audio recording.
• Take care that you do not block the camera's microphone
with your fingers while recording.
• Good recording results are not possible when the camera is
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
- Audio Format: WAVE/IMA-ADPCM (WAV extension)
Microphone
Adding audio (dubbing) is not possible for the following types of images.
- Images created using MOTION PRINT
- Protected images
To delete audio, perform the following operation:
Dubbing ---_ Delete ---_ [SET] ---_ [MENU].
• Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
1.
In the PLAY mode, use [,] and [_.] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a r_ icon.
2.
Press [SET] to start playback.
105
Other Playback Functions (PLAY)