Adjusting The Flash Output - Canon POWERSHOT A75 User Manual

Shooting - Advanced Functions
1 Select _J* (Effect OFF) in the
FUNC. menu.
• See Selecting Menus and Settings (p. 64).
• The current setting is displayed.
2 Select the photo
effect using < or
Adjusting the Flash Output
in M mode, the flash output can be controlled
in three steps when shooting.
1 Select _ (Flash
Output) from the
• If the LCD monitor is on,
you can check the photo
effect by viewing the
image on the LCD
monitor.
• A shot can be taken immediately by pressing
the shutter button. The menu will reappear
after the shot, allowing you to adjust the
settings easily.
3 Press the FUNC. button.
o
2
o
3
86
FUNC. menu.
See Selecting Menus
and Settings (p. 64).
Adjust the flash output using _ or _.
You can shoot the image right after selecting
settings by pressing the shutter button. The
menu displays again after the shot, allowing
you to change the settings easily.
Press the FUNC. button.
When the flash output is low, less shadow
appears in the image. However, when
shooting a wide scene or area, the image will
likely be darker due to insufficient light. When
adjusting the flash output, consider all the
shooting conditions, including the distance to
the subject.