Canon POWERSHOT S95 User Manual page 26

Taking Pictures (Smart Auto)
What if the color and brightness of the images do not turn out as expected?
The scene icon (p. 179) that appears on the screen may not match the actual
scene. If this happens, try sheeting in p mode (p, 74).
What if white and gray frames appear when you point the camera toward
a subject?
When faces are detected, a white frame appears on the face of the main
subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range (p. 88).
If the main subject moves, however, the gray frames will disappear, leaving only
the white frame.
What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and
exposure wm continuously adjust (Servo AF).
What if the indicator blinks orange and _ flashes on the screen?
Attach the camera to a tripod so that the camera does not move and blur the image.
What if the camera does not play any sounds?
Pressing the DISR button while turning on the camera power wil! turn off all
sounds except for warning sounds. To turn the sounds on, press the MENU
button to choose [Mute] in the _1' tab, then press the _ _ buttons to choose [OffJ.
What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 50 cm - 8.5 m (!.8 - 21 ft.) at maximum wide angle ([]), and
approximately 90 cm - 3.0 m (3.0 - 9.8 ft.) at maximum telephoto (F_3).
What if the camera beeps once when the shutter button is pressed halfway?
Your subject may be too close. Move the zoom lever toward [] and hold it until
the lens stops moving. The camera will be at its maximum wide angle setting
and you will be able to focus on subjects that are about 5 cm (2.0 in.) or more
away from the end of the lens. Move the zoom lever toward E_q and hold it until
the lens stops moving. The camera will be at its maximum telephoto setting and
you will be able to focus on subjects that are about 30 cm (!2 in.) or more away
from the end of the lens.
What if the lamp Hghts when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
What if the _ icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
"Wrong flash position. Restart the camera." appears on the screen.
Appears if your finger is pressing on the flash when it tries to pop-up or if
something else hinders the movement of the flash.
26