Canon EOS 450D Instruction Manual page 42

Preparing to Print
_" PictBridge
6 layback the image.
® Press the <[_]> button.
_y,. T he image will appear, and the <_(>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
_y,. T he <_.v> button lamp will light in
blue.
@
RAW images are not compat Die with direct printing.
_ The camera cannot be used with primers compatible onl:y vitb CP Direct
or Bubble Jet Direct.
When connecting the camera to the printer, do not use any cable other
than the interface cable provided.
If there _s a long beeping sound in step 5. it indicates a problem with the
printer. To find out what's wrong, do the following:
Press the < [] > bud:ton [o playback the image aria follow the steps
Below.
1. Press <6 >.
2 On the pnm se[ting screen, select [Print].
The error message will be displayed on the LCD monitor. (p.!42)
If you use the battery to power the camera, make sure it is fully charged.
With a fully charged battery, pnnung up [o about 6 hours is possible.
Before disconnecting [ne cable, turn off the camera aria printer first. Hold
the elug (not the cord) to pul out the cable.
For direct printing, using AC Adapter Kit ACK-E5 tsola separazely) [o
power me camera is recommended.
135