Shootingclose.ups (Macromode); Shooting Continuously (Continuous Mode) - Canon POWERSHOT S10 User Manual

42i!
ShootingClose.Ups (MacroMode)
Use the macro mode to record subjects in the
range of 4.7 to 18 in. (12 to 46 cm) from the
tip or the lens. Always use the LCD monitor in
macro mode to check the image composition
and focus.
1
2
Turn the Mode Dial to the O, i_IM,
IMAGE or _ position.
Press the _ (Macro) button.
[]
3. Shoot, taking particular care not to let
the camera shake.
• Pressing the • button again cycles the
macro mode to off.
• The lower indicator will shine orange
when the shutter button is pressed
halfway in macro mode.
Shooting Continuously
(Continuous Mode)
1 Turn the Mode Dial to the OM or IMAGE
position,
2 Press the _ button until the _ icon
shows in the Display panel,
l°
Shoot.
• The camera will shoot continuously while the
shutter button is held down. Recording will
stop when you release the shutter button.
• The camera will shoot continuously at the
speed of 1.7 images per second _ (when
the LCD monitor is off).
• When the camera's built-in memory
becomes full, the interval between
shots will be a little longer.
These figures reflect standard shootingconditions
established by Canon.Actual figuresmay vary
accordingto the subjectand shooting conditions.