Using Advanced Settings; Printing On Envelopes - Epson 777 Printer Basics Manual

Using Advanced Settings

For maximum control over your
project, you can customize your print
settings—such as
Print Quality
—and use special effects.
Gamma
To access these settings in your
printer software, click
then click the
Advanced
You see the Advanced dialog box.
For details on all the settings, click
Help on screen or see your electronic
Reference Guide (as described on
page 2).
After you customize your print
settings on the Advanced dialog box, you can save them as a group so you can reuse
them whenever you print a similar project. See your electronic Reference Guide for
details.
The default Gamma setting of 1.8 provides the optimum contrast quality
for your photos. However, you can change it to either 1.5 (for decreased
contrast) or 2.2 (for increased contrast; recommended for matching
colors with sRGB devices).

Printing on Envelopes

You can load up to 10 envelopes at a time, flap edge
first and printable side up. Place them against the
right edge of the sheet feeder and slide the left edge
guide against them.
(For best results, press each envelope flat before
loading it, or load one envelope at a time.)
Select as the Media Type setting and
Plain paper
choose the correct envelope size as the Paper Size
setting.
If your printout has smears or banding (light lines), try turning off
Advanced dialog box. (See the instructions above to access the dialog box.)
and
and
Custom
button.
load with the
printable side
up
in the
High Speed
15