Canon POWERSHOT SD750 DIGITAL ELPH User Manual page 103

You can play back images on a television with the supplied AV
cable.
Turn off the Camera and the TV.
Connect the AV cable to
the camera's A/V OUT ter-
minal.
• Use the toggle on the wrist strap or
slip a fingernail under the edge of
the camera's DIGITAL terminal
cover, lift up and plug the interface
cable in all the way.
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
Yellow
O"
D)
(1
m
D)
ml
_Q
• The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 27). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
• You can also use the TV as the display in the shooting
mode.
101