Craftsman 917.388350 Owner's Manual page 5

HOW TO SET UP YOUR LAWN Operator
MOWER presenc_
TO UNFOLD HANDLE controlbar
IMPORTANT: Unfold handle carefully so Upper
handle
as not to pinch or damage control cables.
• Raise handles until lower handle Liftup
section locks into place in mowing
position. Lower
• Remove protective padding, raise handle
upper handle section into place on
lower handle and tighten both handle
knobs.
• Remove handle padding holding
operator presence control bar to upper
handle.
• Your lawn mower handle can be
adjusted for your mowing comfort.
Refer to "Adjust Handle" in the Service
and Adjustments section of this manual.
Mowing
position
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher. To convert to
bagging or discharging, see =To convert
mower" in the OPERATION section of this
manual.
5