Epson Stylus Photo 2000P Setup Manual page 13

Epson user guide printer stylus photo 2000p
Hide thumbs Also See for Stylus Photo 2000P:
Table of Contents

Advertisement

c
Caution:
Make sure the ink cartridge tabs are not under the tabs protruding
from the base of the opened ink cartridge clamps, as this could
damage the clamps.
Note:
Install both ink cartridges. If either of the cartridges is not installed, the
printer will not work.
6. Press the ink cartridge clamps down until they lock in place.
7. Press the orange ink cartridge replacement button. The print head
moves and the printer begins charging the ink delivery system. This
process takes about two and a half minutes.
c
Caution:
Always press the orange ink cartridge replacement button to move
the print head. Do not move it by hand. Doing so may damage the
printer.
While the ink is charging, the P power light flashes and the printer
produces a variety of mechanical sounds. These sounds are normal.
When the ink delivery system has been charged, the print head
returns to the home (far right) position and the P power light comes
on.
c
Caution:
Never turn off the printer while the P power light is flashing.
8. Close the printer cover.

Advertisement

Table of Contents
loading

Table of Contents