Multifunctional settings
PICTURE Menu (continued)
Item
SHARPNESS
PROGRESSIVE
MY MEMORY
20
Adjust the sharpness using the ▲/▼ buttons. :
Clear
Soft
Select the Progressive Mode:
TV
FILM
TURN OFF
memo
This function performs only at an interlaced signal of a
VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input of
525i or 625i signal. The FILM mode is adaptable to the 3-2 Pull-
Down system to the conversion.
memo
When the TV or FILM is selected, the screen image will
be crisper. But it may cause a certain defect (for example, jagged
line) of the picture at a quick moving object. In such a case, please
select the TURN OFF, even though the screen image may lose the
crisp.
memo
This function may cause a certain degradation of the picture.
In such a case, please select the TURN OFF.
Selecting one from the following and then pressing the ► (or the
ENTER) button performs each function.
LOAD1
SAVE4
This projector has 4 numbered memories for adjustment data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current
adjustment data on the memory whose number corresponds with
the command's number. Performing the LOAD1, LOAD2, LOAD3 or
LOAD4 loads the data on the memory whose number corresponds
with the command's number, and adjusts the picture automatically
depending on the data.
Description
LOAD2
LOAD3
SAVE3
SAVE2
LOAD4
SAVE1