Removing The Processor; Installing And Removing Memory; Guidelines For Dual Channel Memory Configuration; Two Or Four Dimms - Intel DG965SS Product Manual

Removing the Processor

For instructions on how to remove the processor fan heat sink and processor, refer to
the processor installation manual or the Intel World Wide Web site at:
I ntegration of the Boxed Intel
1

Installing and Removing Memory

NOTE
To be fully compliant with all applicable Intel SDRAM memory specifications, the board
requires DIMMs that support the Serial Presence Detect (SPD) data structure. You can
access the PC Serial Presence Detect Specification at:
http://www.intel.com/technology/memory/ddr/specs/dda18c32_64_128x72ag_a.pdf
Desktop board DG965SS has four 240-pin DDR2 DIMM sockets arranged as DIMM 0
and DIMM 1 in both Channel A and Channel B.

Guidelines for Dual Channel Memory Configuration

Before installing DIMMs, read and follow these guidelines for dual channel
configuration.

Two or Four DIMMs

Install a matched pair of DIMMs equal in speed and size (see Figure 13) in DIMM 0
(blue) of both channels A and B.
Figure 13. Dual Channel Memory Configuration Example 1
Installing and Replacing Desktop Board Components
Pentium 4 Processor in the 775-Land Package
® ®
33