Epson Stylus DX6000 Series User Manual page 28

LCD Screen
Icon Text
26
Solving Problems
Cause
An error occurred during
photo pre-scanning.
Not enough ink to perform
head cleaning.
There is a problem with the
product.
Waste ink pad in the
product is saturated.
The memory card does not
contain any valid photos.
Memory card error.
The connected camera is
not recognized.
The paper thickness lever
is set to the wrong position.
No memory card is
inserted.
Solution
Check that the photo is placed correctly and try again (& "Placing
Originals on the Document Table" on page 8).
Replace with new ink cartridges (& "Replacing Ink Cartridges" on
page 19).
Turn the product off and then back on. If the error does not clear,
contact your dealer (& "Contacting Customer Support" on page
29).
Contact your dealer to replace it (& "Contacting Customer Support"
on page 29).
Remove the memory card (& "Handling a Memory Card" on page
12).
Remove the memory card (& "Handling a Memory Card" on page
12).
Check the connection and try again (& "Printing from a Digital
Camera" on page 18).
Set the paper thickness lever to the correct position and try again.
If you are printing on paper, move the lever to the m position. If you
are printing on envelopes, move the lever to the ^ position.
Insert a valid memory card and try again (& "Handling a Memory
Card" on page 12).