Virus Warning; Quick Power On Self Test; Boot Up Numlock Status; Gate A20 Option - Biostar TFORCE 6100 AM2 Setup Manual

TForce 6100 AM2 BIOS Setup

Virus Warning

This option allows you to choose the VIRUS Warning feature that is used to
protect the IDE Hard Disk boot sector. If this function is enabled and an attempt is
made to write to the boot sector, BIOS will display a warning message on the
screen and sound an alarm beep.
Disabled (default)
Enabled

Quick Power On Self Test

Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Disabled
Enabled (default)

Boot Up NumLock Status

Selects the NumLock State after the system switched on.
The Choices:
On (default)
Off

Gate A20 Option

Select if chipset or keyboard controller should control Gate A20.
Normal A pin in the keyboard controller controls GateA20.
Fast (default) Lets chipset control Gate A20.

Typematic Rate Setting

When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can be
configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30.
Virus protection is disabled.
Virus protection is activated.
Normal POST.
Enable quick POST.
Numpad is number keys.
Numpad is arrow keys.
13