Table of Contents
Advertisement
Adjusting the Call Volume
During a call, use the Volume keys on the left side of the
device, to adjust the earpiece volume.
During a call, press the Up volume key to increase the
volume level and the Down volume key to decrease the
level.
– or –
Tap the on-screen Extra volume button to increase the
incoming call volume even more than by just using the
volume keys.
• Enabled/disabled via the Call settings menu (Call settings
Use extra vol. for calls). For more information, refer to
"Configuring General Call Settings" on page 268.
From the Home screen, you can also adjust the ring volume
using these keys.
84
Placing a Call on Hold
You can place the current call on hold whenever you want. If
your network supports this service, you can also make
another call while a call is in progress.
To place a call on hold:
1. Tap Hold to place the current call on hold.
2. Tap Unhold to activate the call that is on hold.
To make a new call while a call is in progress:
1. Enter the new phone number that you wish to dial or
look it up in Call history.
2. Tap Add call to dial the second call.
3. Dial the new phone number and tap
To switch between the two calls:
Tap Swap.
The previous In call number turns gray and displays
On hold. The new active call displays a green
background behind the number.
.
Advertisement
Table of Contents
