(4) Remove the other bolts while rotating the
engine using socket wrench.
22) Remove the pitching stopper.
23) Disconnect the fuel delivery hose, return hose
and evaporation hose.
NOTE:
• Catch fuel from the hose into container.
• Disconnect the hose with its end wrapped with
cloth to prevent fuel from splashing.
24) Remove the fuel filter and bracket.
Engine Assembly
25) Support the engine with a lifting device and
wire ropes.
ME-00044
26) Support the transmission with a garage jack.
NOTE:
Before moving the engine away from transmission,
check to be sure no work has been overlooked. Do-
ing this is very important in order to facilitate re-in-
stallation and because transmission lowers under
its own weight.
MT-00069
27) Separation of the engine and transmission.
(1) Remove the starter. <Ref. to SC(H4SO)-7,
REMOVAL, Starter.>
(2) Install the ST to torque converter clutch
case. (AT model)
ST 498277200
ME-00045
ME-00046
ME(H4DOTC)-47
MECHANICAL
ME-00047
ME-00048
STOPPER SET
ST
ME-00049