Table of Contents
Advertisement
SY-6IWM Quick Start Guide
Installation
2
2
To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:
Before handling the Motherboard, ground yourself by touching on to an unpainted
l
portion of the system's metal chassis.
Remove the Motherboard from its anti-static packaging. Hold the motherboard by the
l
edges and avoid touching its components.
Check the Motherboard for damage. If any chip appears to be loose, press carefully
l
to seat it firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new SY-6IWM Motherboard. For detailed information, please
refer to the SY-6IWM Motherboard User's guide and Technical Reference online manual on
in the CD-ROM package that came with your Motherboard.
Gather and prepare all necessary components to complete the installation successfully:
u
Slot 1 processor with built-in CPU cooling fan (boxed type)
u
SDRAM module
u
Computer case with adequate power supply unit
u
Monitor
u
PS/2 Keyboard
u
Pointing Device (PS/2 Mouse)
u
Speaker(s) (optional)
u
Disk Drives: HDD, CD-ROM, Floppy drive ...
u
External Peripherals: Printer, Plotter, and Modem (optional)
u
Internal Peripherals: Modem and LAN cards (optional)
Note: 1. This Motherboard features one built-in VGA port and three built-in audio-stereo
ports. Therefor you do not need to install neither a VGA card nor a sound card.
2. If you want to use an external speaker connected to "Line-out" port, please make
sure to use an "amplified speaker" that can generate proper output sound volume.
6
Advertisement
Table of Contents
