Summary of Contents for Soundstream PICASSO COMPONENT SYSTEM
Page 1
Keep in a safe and dry place for future reference. Model Number of your woofer Serial Number Place of purchase PICASSO COMPONENT SYSTEM Notes OWNERS MANUAL/INSTALL GUIDE Soundstream Technologies 1550 S. Maple Ave. Montebello, CA 90640 USA www.SOUNDSTREAM.com PH: 323.724.4600 FX: 323.722.8125 www.soundstream.com...
Tweeter Installation Congratulations on your purchase of Soundstream’s Picasso component speaker system. The Picasso component system represents Soundstream’s Mounting hardware contained in the packaging will allow a surface or flush design approach to creating musical reproduction with the richness and mount installation.
Specifications Mid-bass Installation Determine the mounting location. Factory speaker locations are • Impedance 4 ohms recommended for ease of installation. When installing in the factory speaker locations, make sure that there is enough depth to Freq.Response 50Hz - 20KHz accommodate the replacement speaker. Sensitivity 89dB If an alternate locations is used, measurements should be carefully...
Crossover Installation 1. The crossover should be mounted in a dry, moisture free location. Never install the crossover in the door where it can be damaged by water and moisture. The crossover can be installed in the door panel as long as there is an undamaged vapor barrier.