Starting The System; Turning On The Computer - Epson Equity LT-286e User Manual

Starting the System

6
After you complete steps 1 through 5, you're ready to turn on
the power and start using your Equity LT-286e computer. Read
these safety rules first to avoid accidentally damaging your
computer or injuring yourself:
there is a hardware problem you cannot solve after reading
Chapter 4 on troubleshooting, consult your Epson dealer.
in use; this can destroy data stored on the disk or make the
entire disk unusable. The disk drive indicators are located
on the status indicator bar. The right disk-in-use icon
indicates that the hard disk drive is in use. The left disk-in-
use icon indicates that the built-in diskette drive is in use.
power before switching it back on. Turning the power off
and on rapidly can damage the computer's circuitry.
Spilled liquid can damage the circuitry of your components.

Turning On the Computer

After you have connected the AC adapter and power cord, you
can turn on your computer. Leave the AC adapter connected
while you use the computer.
You can turn on your computer with or without a system
diskette in the diskette drive. For now, leave the drive empty.
1-14
Setting Up Your System