Setting the Boot Options
When
you
see the Boot Options screen, which allows you to define the
drive boot sequence and determine which power-on diagnostic
tests the computer performs when you start your system.
The
Boot sequence
the computer checks the drives for an operating system when
you turn it on or reset it. The table below describes the
available options.
Boot sequence option settings
* Default setting
The
Floppy check
process by disabling power-on diagnostic checking of the
diskette drive type. The default setting for this option is
Enabled;
Boot
the
If you set the
will not be able to start your system when there is a problem
2 - 1 2
Running SETUP and Installing Drivers
select
Boot Options
option determines the order in which
option allows you to speed up the boot
however, you should select
sequence
option to C: only.
Boot sequence
from the Main Menu, you
Disabled
option to C-
if you set