Customizing Projector Features; Image Sizing - Epson 6100 User Manual

Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text,
and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate
aspect ratio for the type of picture you're viewing (see page 28).
■ Output Scaling
Signal > Advanced > Output Scaling
For component video formats, this setting lets you see the edges of the image that are not
normally visible in the picture (see page 68). If you see interference when you set
Scaling
■ Position
Signal > Position
Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port.
Use the arrow buttons to fine-tune the position of the image on the screen.
■
Aspect
Signal > Aspect
This setting lets you change the aspect ratio of your image, and works the same as
pressing the
■ Zoom Caption Pos.
Signal > Zoom Caption Pos.
Lets you adjust the shape and position of the image so that subtitles are visible (available
only if the aspect ratio has been set to
of the image, and
output scaling before zoom position.
46
Making Detailed Adjustments
to , try adjusting the
100%
button on the remote control. See page 28 for more information.
Aspect
Zoom Caption Pos.
as described below.
Position
). Use
Zoom Zoom Size
to move the image up or down. You can adjust
Output
to adjust the proportions