Epson CD5220 User Manual page 16

CD5220 customer display
Command
CLR
CAN
ESC * n
ESC & s n m
[a (p1..pa)]x
(m-n+1)
ESC ?
ESC %
ESC _ n
ESC f n
ESC c n
ESC = n
ESC s 1
ESC d 1
(REMARK)
* While using command "ESC QA" or "ESC QB", these two commands could
using combine with terminal printer -- TP 2688.or TP3688
* If using commands "ESC QA" or "ESC QB
using command "CLR" or "CAN" to change operating mode.
* If using commands "ESC QD
command, and clear upper line and move cursor to upper line left-most position.
Set international font set( Table 6-2)
6-3)
n international font set
A U.S.A.
Code description
(hex)
0C
18
1B 2A n
1<=n<=4
1B 26 1 n m
[a(p1..pa)]x (m-n+1)
20<n<=m<=FF
1B 3F
1B 25
1B 5F n
n=0,1
1B 66 n
1B 63 n
1B 3D n
n=1,2,3,31,32,33
1B 73 01
1B 64 01
Table 6-1
,upper line message move continuously, till receive a new
n international font set
N NORWAY
Function description
clear display screen , and clear
string mode
clear cursor line, and clear
string mode
brightness adjustment
define download characters.
a=1-5
p1..p5 =row1..row5
delete download characters.
select/cancel
character set.
set cursor ON/OFF
select international fonts set
select fonts ,ASCII code or JIS
code
select peripheral device, Display
or Printer
store the use define character
into EEPROM
store the use define character
from EEPROM
,others commands can not be used except
Select code table(Table
n international font set
A compliance with ASCII code
download