Geotagging Images While Shooting - Canon POWERSHOT SX240 HS User Manual

Using GPS Function
_J Geotagging images Shooting
While
Camera location information (latitude, longitude, and elevation) can be added
as you shoot, for later reference (p. 149). This information also enables you
to see the shooting location of your still images and movies on a map, when
you use the included software (p. 2).
Set [GPS] to [On].
Follow steps 1 - 2 on p. 45 to configure the
setting.
.... Shoot.
The still images and movies you shoot will
now be geotagged.
'V To review the location information (latitude,
longitude, and elevation) of your geotagged
...<._%_:::. still images or movies, see "GPS Information
Display" (p. 149).
The shooting date and time can be recorded when you have selected [GPS Auto Time: On].
Geotagging applies the initial camera location and shooting date and time, as
acquired when you begin shooting a movie.
For movies made by using Movie Digest (p. 92), geotagging applies the initial
camera location and shooting date and time, as acquired for the first movie shot
that day.
47