Epson PhotoPC L-410 User Manual page 20

Before you start, make sure the batteries are installed and
the camera is turned on, as described on pages
10 and 11.
1
Turn the Mode dial to
If you want to turn the LCD screen off to save
battery power, press the
have to use the viewfinder instead of the screen to
frame your shot.
2
If you want to adjust the quality (resolution) or
other settings, press the
for a list of available settings. For more information,
see the Camera User's Guide on your computer.
3
Make sure you are at least 20 inches (50 cm) away
from your subject.
To zoom in on your subject, press the
(telephoto) button.
To zoom out, press the
button.
4
Center your subject in the middle of the square
focus frame on the screen.
The default flash setting is automatic, indicated by
the icon on the LCD screen. The flash will go off
automatically whenever necessary.
20
manual.
button twice. You will
DISP
button. See page 22
MENU
(wide-angle)
W
T