Samsung PN50C680G5FXZA User Manual page 29

Network Setup (Auto)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV's
wired LAN connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU
remote, use the or button to select Setup, and
then press the ENTERE button.
3. Use the or button to select Network in the Setup
menu, and then press the ENTERE button. The
Network screen appears.
Network
1HWZRUN 7\SH
Network Setup
Network Test
U Move E Enter R Return
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
Network Setup
,QWHUQHW 3URWRFRO 6HWXS
IP Address
Subnet Mask
Gateway
DNS
DNS Server
U Move E Enter R Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the
on your remote. Acquiring an IP address can take up to
2 minutes depending on network conditions.
10. Follow the directions for Manual if the TV does not
automatically acquire a network connection.
Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
button on your
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
How to set up manually
To set up your TV's cable network connection manually,
:LUHG
follow these steps:
1. Follow Steps 1 through 6 in the "How to set up
2. Set Internet Protocol Setup to Manual.
3. Press the
4. Enter the IP Address, Subnet Mask, Gateway, and
5. When done, press the
6. Select Network Test to check the Internet connectivity.
$XWR
:
:
:
: Auto
:
RETURN button
screen.
Network connection values are displayed.
automatically" procedure.
button on your remote to go to the first
entry field.
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
RETURN button on your remote.
29
English