Oki B8300n Limited Warranty page 3

• Product news
• Manuals
• Drivers and utilities
• Material Safety Data Sheets
• Searchable knowledge base
• and much more!
Just take a few minutes setting it up once, then you
can check your Personal Solutions Center for the lat-
est information at any time.
Get started today by visiting http://MY.OKIDATA.com.
Customer Support Representatives
1-800-654-3282 (1-800-OKI-DATA)
Customer Support Representatives are available 24
hours a day, 7 days a week. Please have the model
number and serial number for your machine handy.
Be sure that you are calling from a telephone close to
your machine so you can describe your problem accu-
rately and follow up on the suggestions of the Cus-
tomer Support Representative right while you are on
the phone. Our Customer Support Representatives
are trained on all current OKI products. They can
answer your questions regarding:
• Locations of sales and service dealers
• Installation of your machine
• Usage/normal maintenance of your machine
• Error message interpretation/solutions
• Parts and supplies identification
• Consumer relations
Note:Customer Support Representatives are not
trained to provide assistance with the use of
commercial software packages. Please consult
your software user's manual for times and
availability of their support.
English
Safety Information
120-Volt Models
For all countries / regions
Your OKI product has been carefully designed to give
you years of safe, reliable performance. As with all
electrical equipment, there are a few basic precau-
tions you should take to avoid hurting yourself or
damaging the product.
• Carefully read the provided setup and operating
instructions.
• Save all provided documentation for future
reference.
• Read and follow all warning and instruction labels
on the product itself.
• Unplug the product before you clean it. Use only a
damp cloth; do not use liquid or aerosol cleaners.
English
• Place your product on a firm, solid surface. If you
put it on something unsteady, it may fall and be
damaged. If you place it on a soft surface, such as
a rug, sofa, or cushion, the vents may be blocked,
causing the product to overheat.
• Protect your product from overheating. Make sure
no obstructions block the openings of the product.
Do not put the product on or near a heat source
(such as a radiator or heat register). Keep the
product out of direct sunlight.
• Always use this product in a well ventilated area.
Allow enough room around the product for
adequate ventilation and easy access to the paper
trays. If you put the product in any kind of
enclosure, make sure the enclosure is well
ventilated.
• Do not use your product near water. Do not spill
liquid of any kind into it.
• Be certain that your power source matches the
rating listed on the back of the product. If you are
not sure, check with your dealer or with your local
power company.
• Do not connect this product to an uninterruptible
power supply (UPS). For further information
please contact Oki Data at 1-800-OKI-DATA.
• Your product has a grounded, three-prong plug as
a safety feature. This plug only fits into a
grounded outlet. If the plug does not fit, the outlet
may be an older, non-grounded type. Contact an
electrician to have the outlet replaced. Do not use
an adapter to defeat the grounding.
• Install the product near an easily accessed power
outlet.
• Avoid damaging the power cord. Do not put
anything on it or place it where it will be walked
on. If the cord becomes damaged or frayed,
replace it immediately.
• If you are using an extension cord or power strip
with the product, make sure that the total of the
amperes required by all the equipment on the
extension is less than the extension's rating. The
total ratings of all equipment plugged into the
outlet should not exceed 15 amperes.
• Do not poke anything into the ventilation slots of
the product. You could get an electrical shock or
cause hazardous electrical arcing, which could
cause a fire.
• Aside from the routine maintenance described in
the documentation, do not try to service the
product yourself. Removing the cover may expose
you to shocks or other hazards.
• Do not make any adjustments other than those
outlined in the documentation. You may cause
damage that will require extensive repair work.
The provided documentation explains how to get
your product serviced by qualified Oki Data
technicians.
• If anything happens that indicates that your
product is not working properly or has been
damaged, unplug it immediately and follow the
procedures in the provided documentation for
having your product serviced.
3