Installing The Battery - Epson L-500V User Manual

Removing a Memory Card
Note:
Your camera won't store photos and some of its buttons
won't operate without a memory card correctly installed.
1
Make sure the camera is turned
off, then slide the battery cover
until it pops up.
2
Push in the memory card to
release it. The card pops out.
3
Pull out the memory card, then
press down on the battery cover and slide it back
into place.

Installing the Battery

1
Turn the camera on its left side.
2
Slide the battery cover until it
pops up as shown:
3
Insert the battery into the
compartment, positioning it as
shown with the arrow facing
down. Press it down until it
clicks into place.
12