Other Setup Options - Epson 400 Series User Manual

Other Setup Options

■ Keystone
Settings Keystone
Adjusts the shape of the image, if the left and right sides are not parallel after tilting the
projector up or down at the screen (see page 25).
■ Projection
Settings Projection
Inverts the image for overhead projection.
■ Direct Power On
Settings Operation
Sets projection to start when the main power switch is turned on, without pressing the
button on the remote control or the
On
Note: When direct power on is enabled, power surges that occur after a power outage can
cause the projector to turn on.
■ Video Signal
Settings Input Signal
Leave this setting on
NTSC or PAL (for standard TV formats).
■ Input A
Settings Input Signal
Change this setting to match the type of equipment connected to the Input A port.
For component video, select
or select or
YCbCr
■ Trigger Out
Settings Operation
Turn on this setting if you want the
the projector is operating. You can use this to raise or lower your projection screen.
Direct Power On
Video Signal
so the projector can automatically interpret the format, such as
Auto
Input A
to let the projector automatically interpret the signal;
Auto
to manually select your video equipment's signal.
YPbPr
Trigger Out
Trigger out
button on the projector.
Power
port to output a 12-volt signal while
Making Detailed Adjustments
45