Registration Using Automatic Detection - Epson Artisan EMP-830/EMP-835 Operation Manual

Registering Projectors for Monitoring

Registration Using Automatic Detection

PROCEDURE
1
Click the "Auto detect" button in the "Register
projector" window.
2
Select the projector(s) to be registered, and then click
the "Add" button.
If a projector does not appear in the list, use "Registration
Using IP Address (Manual Registration)".
• Projectors that have been registered using automatic detection will
be re-detected on the basis of projector name each time EMP
Monitor is started.
• If a password entry window is displayed, enter the password for the
projector's administrator and then click the "OK" button.
If more than one projector was selected, the password entry windows
for each projector will be displayed in succession.
3
s p.5
TIP
Click the "Close" button to return to the main EMP
Monitor window.
Refer to "Main EMP Monitor Window" for details on using the
s
main window. p.6
EMP Monitor Operation Guide
4