Table of Contents
Advertisement
STEP 5:
(SEE FIGURE 5)
•
Lock the drawbar into position by inserting a 3/8" x 3"
hitch pin (20) into the center hole and securing it with
a 3/32" cotter pin (19).
STEP 7:
(SEE FIGURE 7)
•
Slide the bag frame tube (1) through the front flap in
the bottom of the bag.
•
Slide the two lower hopper tubes (10) into the flaps at
the front of the hopper bag (3) as shown.
FIGURE 5
FIGURE 7
STEP 6: (SEE FIGURE
6)
•
Attach the hitch bracket (12) and straight hitch
bracket (13) to the drawbar using two 5/16" x 2-1/2"
hex bolts (15) and 5/16" nylock nuts (21).
•
Assemble a 3/8" x 3" hitch pin (35) and two 3/4"
spacers (22) to the hitch brackets. Secure them in
place with a 3/32" hair cotter pin (18).
FIGURE 6
STEP 8:
(SEE FIGURE 8)
•
install a rear hopper tube (11) onto the ends of the
lower hopper tubes (!0) making sure the holes in the
rear hopper tube are facing up.
•
Secure the rear hopper tube (11) to the lower hopper
tubes (10) with two 1/4"x 1" curved head bolts (26)
and 1/4" nylock nuts (24).
NOTE: Hopper bag (3) not shown for clarity.
11
FIGURE 8
6
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
Table of Contents
