Epson Stylus Photo RX500 Basic Operation Manual page 9

When choosing a power source
❏ Use only the type of power source indicated on the label on the
back of this product.
❏ Use only the power cord that comes with this product. Use of
another cord may cause fire or electric shock.
❏ This product's power cord is for use with this product only. Use
with other equipment may cause fire or electric shock.
❏ Be sure your AC power cord meets the relevant local safety
standards.
❏ Do not use a damaged or frayed power cord.
❏ If you use an extension cord with this product, make sure that
the total ampere rating of the devices plugged into the extension
cord does not exceed the cord's ampere rating. Also, make sure
that the total ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet's ampere rating.
❏ If you plan to use this product in Germany, the building
installation must be protected by a 10 or 16 amp circuit breaker
to provide adequate short-circuit protection and over-current
protection for this product.
When using a memory card
❏ Do not remove the memory card or turn off this product while
the computer and the memory card are communicating (when
the memory card light is flashing).
❏ The methods for using memory cards vary according to card
type. Be sure to refer to the documentation packaged with your
memory card for details.
❏ Use only memory cards compatible with this product. Refer to
"Loadable memory card" on page 44.
Safety Instructions
9