Fujitsu PCI Gigabit Ethernet User Manual page 69

Figure B.2 10/100/1000Base-T * 2ports (SE0X7GD1X)
- Meaning of the LEDs (SE0X7GD1X)
The following tables show the meaning of each LED.
1000M LED indicates the following operation status.
1000M LED
ON (Green) The card is connected to a 1000Mbps network and is ready to communicate.
OFF The card is not connected to a 1000Mbps network.
100M LED indicates the following operation status.
100M LED
ON (Green) The card is connected to a 100Mbps network and is ready to communicate.
OFF The card is not connected to a 100Mbps network.
LINK/ACT LED indicates the following operation status.
LINK/ACT LED
ON (Green) The card is connected to a 1000Mbps, 100Mbps or 10Mbps network and is ready to communicate.
BLINKING
The card is transmitting or receiving network data.
(Green)
The card is not connected to a 1000Mbps, 100Mbps or 10Mbps network, and the card is not transmitting or
OFF
receiving network data.
- Location of the LEDs (SE0X7GQ1X/SE0X7GQ2X)
The following figures show the location of the LEDs on SE0X7GQ1X and SE0X7GQ2X.
Description
Description
Description
- 63 -