Attaching Crt Display Unit, Keyboard, Mouse, And Lan Cables - Fujitsu DESKPOWER 2000 Series User Manual

Attaching CRT display unit, keyboard, mouse, and LAN cables

Note the following
The connection explained on this page supplies power to the CRT display unit from the PC main
unit. In this case, the power cord supplied along with the CRT display unit is not used.
Connect the mouse.
Attach the mouse cable
connector to the mouse
connector (make sure the colors
of the two connectors match)
located on the rear of the PC
main unit while keeping the
arrow imprinted in the mouse
cable connector housing facing
to the right.
Connect the
keyboard.
Attach the keyboard
cable connector to the
keyboard connector
(ensuring the colors of
both connectors
match) on the rear of
the PC main unit while
keeping the arrow
imprinted in the
keyboard cable
connector housing
facing to the right.
Connect the CRT
cable to the PC
main unit.
Attach the CRT
cable connector to
the CRT connector
on the rear of the PC
main unit, and
tighten the
connection screws.
Connect the power cord
to the service outlet.
Attach the plug of the
supplied CRT power cord
to the service outlet of the
PC main unit.
Connect the LAN cable.
Attach the other end of
the twisted-pair cable
(purchased separately) an
appropriate LAN
connector.
Connect the power cord
to the CRT display unit.
Attach the female connector
of the supplied CRT power
cord to the inlet on the rear
of the display unit.
Connect the LAN cable.
Attach one end of a
twisted-pair cable
(purchased separately) to
the LAN connector on the
rear of the PC main unit.
5