Rear Deflector - Craftsman 917.387101 Operator's Manual

3 POSITION "EURO" OR "EZ"
The handle on your lawn mower has three
(3) height positions - adjust to height that
suits you.
• Remove knob and carriage bolt on one
side of the lower handle.
• While holding handle assembly, remove
knob and carriage bolt from opposite
side, align hole in handle with desired
hole in handle bracket and reassemble
bolt and knob and tighten securely.
• Align opposite side of handle with same
positioning hole and secure with bolt
and knob.
"EURO" ADJUSTMENT
Handle
adjustment
bracket _
Knob
High pin
Medium_ 3-positionhandle
_adjustment
bracket
Bolt "ADJUSTABLE" HANDLES
The upper handle may be adjusted to four
(4) different height positions.
• Loosen both handle knobs only enough
to allow the upper handle to pivot to the
desired adjustment position.
• Tighten both handle knobs securely.
Handle
" " knob
_Handle
Jstment
/
Handle
knob
Knob
3 POSITION "QUICK"
The handle on your lawn mower has three
(3) height positions - adjust to height that
suits you.
• Squeeze the bottom ends of lower
handle towards each other until the pin
in handle can be inserted into one of the
three height adjustment holes.
REAR DEFLECTOR (IF EQUIPPED)
The rear deflector, attached between the
rear wheels of your mower, is provided to
minimize the possibility that objects will be
thrown out of the rear of the mower into
the operator mowing position. If the
deflector becomes damaged, it should be
replaced.
19