Epson Stylus CX8400 Series Quick Manual page 35

7. Insert the new ink cartridge into the holder and push it down until it clicks
into place.
8. Once you replace all the cartridges that need replacing, close the cartridge
cover and push it down until it clicks into place.
9. Close the scanner.
10. Press to begin charging the ink. This takes
OK
about 2 minutes. When you see a completion
message on the display screen, ink charging is
finished.
Caution:
Never turn off the CX8400 Series while ink is
charging or you'll waste ink. If you see an ink
replacement message on the display screen, press
OK and press down all the cartridges securely.
Note:
If you replaced a cartridge while copying a document or photo, cancel printing and
make sure your original is still placed correctly on the document table. Then copy
your original again.
If you remove an expended ink cartridge or a cartridge after the low ink message
appears, you cannot reinstall and use the cartridge.
Replacing Ink Cartridges
35