Epson Stylus NX100 Series Start Here Manual

Epson printer start here
Hide thumbs Also See for Stylus NX100 Series:

Advertisement

Start Here
Epson Stylus
1
Unpack
(Included for Canada only)
If anything is missing, contact Epson as described on the back.
Caution: Do not open the ink cartridge package until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.
Canada only: For French speakers, remove stickers from the backing sheet
and place over corresponding text on the control panel.
Remove all the tape.
2
Turn on the NX100 Series
1
Connect the power cable.
Note: Do not connect to the computer at this time.
2
Press the
®
On button.
NX100 Series

Advertisement

Table of Contents
loading

Summary of Contents for Epson Stylus NX100 Series

  • Page 1 Epson Stylus Unpack (Included for Canada only) If anything is missing, contact Epson as described on the back. Caution: Do not open the ink cartridge package until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.
  • Page 2: Install Cartridges

    Install cartridges Note: Do not load paper yet. Lift up the scanner and prop it up with the support. Shake the ink cartridges, then unpack them. Remove only the yellow tape from each cartridge. Caution: Do not remove any other seals or the cartridge may leak. Insert the cartridges in the holder for each color.
  • Page 3: Load Paper

    Release the scanner support and lower the scanner. Press the Stop button to charge the ink. Charging takes about 2 minutes. Caution: Don’t turn off the NX100 Series while it is charging or you’ll waste ink. Load paper Open the paper support. Open the output tray and pull out the extension.
  • Page 4 Flip the feeder guard forward. Then squeeze the edge guide and slide it left. Load paper against the right edge and underneath the tab, then slide the edge guide over. 8½ Note: Don’t load the paper sideways. Flip the feeder guard back.
  • Page 5: Install Software

    Follow the on-screen instructions to install the rest of the software and register your NX100 Series. When you’re done, remove the CD. You’re ready to copy, print, and scan! See the Quick Guide or your on-screen Epson Information Center for instructions. ® 2000, XP, XP Professional x64 Edition, ®...
  • Page 6 Follow the on-screen instructions to install the rest of the software and register your NX100 Series. When you’re done, eject the CD. You’re ready to copy, print, and scan! See the Quick Guide or your on-screen Epson Information Center for instructions. Epson icon.
  • Page 7: Control Panel

    Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 Pacific Time, Monday through Friday.
  • Page 8: Need Paper And Ink

    Cyan Magenta Yellow Epson and Epson Stylus are registered trademarks, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark of Seiko Epson Corporation. DURABrite is a registered trademark of Epson America, Inc. General Notice: All other trademarks are the property of their respective owners. Epson disclaims any and all rights in those marks.

This manual is also suitable for:

Stylus nx105

Table of Contents