Epson Stylus NX100 Series Start Here Manual page 6

Macintosh
1
Make sure the NX100 Series is NOT
CONNECTED to your computer.
2
Insert the NX100 Series CD.
3
Double-click the
4
Click Install and follow the on-screen
instructions.
5
When prompted, connect the USB cable. Use any open USB port on
your Macintosh.
Note: If installation doesn't continue after a moment, make sure you
securely connected and turned on the NX100 Series.
6
Mac OS X 10.5 users: skip to step 10.
Other users: continue with step 7.
7
When you see this screen, click Open the Printer List.
8
Follow the steps on the right of the screen to add the NX100 Series.
9
Click Next again, if necessary.
10
Follow the on-screen instructions to install the rest of the software
and register your NX100 Series.
11
When you're done, eject the CD.
You're ready to copy, print, and scan! See the Quick Guide or your
on-screen Epson Information Center for instructions.
®
Epson icon.