Security Setting - Asus A46CB User Manual

Security Setting

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Main Advanced Advanced Boot Boot
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the user's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup, the User will
have Administrator rights.
Administrator Password Status
User Password Status
Administrator Password
User Password
HDD Password Status :
Set Master Password
Set User Password
I/O Interface Security
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
To set the password:
On the Security screen, select Administrator Password or User
1.
Password.
2. Type in a password and press [Enter].
3. Re-type to confirm the password and press [Enter].
4. Password is then set.
To clear the password:
1. On the Security screen, select Administrator Password or User
Password.
2. Enter the current password and press [Enter].
Leave the Create New Password field blank and press [Enter].
3.
4. Leave the Confirm New Password field blank and press [Enter].
5. Password is then cleared.
You will be asked to enter the User Password whenever
you power on the Notebook PC (enter BIOS or OS). The
Administrator Password is only asked when you would like to
enter and configure the BIOS settings.
Notebook PC User Manual
Security Save & Exit
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
Set Administrator Password.
The password length must be in
the following range:
Minimum length 3
Maximum length 20
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save
ESC : Exit
A-5