Gigabyte GV-RX70128D Manual page 9

4. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from
this slot; then align your graphics card with
the PCI Express x 16 slot, and press it in
firmly until the card is fully seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your graphics
card; then turn on the computer and
monitor.
To Flat Panel Display
To VGA Monitor
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
7-Pin for TV-out only
- 7 - Hardware Installation