Epson Stylus CX7000F Series Basic Manual page 32

Selecting Send/Receive Settings
Your CX7000F Series is set up to send and receive faxes using the default settings
below. For more information about these and other fax settings, see the User's
Guide.
Setting and Options
Paper Size
Letter (8.5 × 11; default)
Legal (8.5 × 14)
A4 (8.3 × 11.7)
Automatic Reduction
On (default)
Off
Last Transmission Report
Off
On Error (default)
On Send
Dial Mode
Tone (default)
Pulse
DRD
All (default)
Single
Double
Triple
Double & Triple
ECM
On (default)
Off
V.34
On (default)
Off
Rings to Answer
5 (default)
1, 2, 3, 4, 5, 6, 7, 8, or 9
32
Faxing a Photo or Document
Description
Indicates the size of the paper loaded in the CX7000F
Series for printing received faxes.
Indicates whether large received faxes are reduced
in size to fit on the selected Paper Size or printed at
their original size on multiple sheets.
Indicates whether or when the CX7000F Series
prints a report for outgoing faxes. Select Off to turn
off report printing, On Error to print reports only
when an error occurs, or On Send to print reports for
every fax you send.
Indicates the type of phone system to which you've
connected the CX7000F Series.
Indicates the type of answer ring pattern you want to
use to receive faxes. You must have set up your
phone system to use different ring patterns to select
an option other than All.
Indicates whether you use Error Correction Mode to
automatically request retransmission of fax data that
is received with detected errors.
Indicates the speed at which you transmit faxes.
On is 33.6 Kbps and Off 14.4 Kbps.
Indicates the number of rings that must occur before
the CX7000F Series automatically receives a fax.