Solving Problems; Error Messages - Epson Stylus CX7000F Series Basic Manual

Solving Problems

If you have a problem with your Epson Stylus CX7000F Series all-in-one, check
the display on the control panel to diagnose the cause.
You can also check "Problems and Solutions" on page 54 for basic troubleshooting
suggestions, or double-click the User's Guide icon on your computer desktop for
more detailed help.
See these sections:
■
"Error Messages" (below)
■
"Problems and Solutions" on page 54
■
"Where To Get Help" on page 57

Error Messages

Display message
Paper out -> Load paper into the
sheet feeder, then press the OK
button.
Paper jam -> Press the OK button.
Remove any remaining jammed
paper by hand.
[C, M, Y, B]: Ink low -> Press the OK
button to begin ink cartridge
replacement.
Replace [Cyan, Magenta, Yellow,
Black] ink cartridge -> Press the OK
button to begin ink cartridge
replacement.
No [Cyan, Magenta, Yellow, Black]
ink cartridge -> Press the OK button
to install a new ink cartridge.
52
Solving Problems
Cause and solution
Load or reload paper in the sheet feeder and
x
press the Start Color/OK button to
continue. See page 6 for details.
See page 55 for instructions on clearing the
paper jam.
Ink is low in one or more of the indicated
cartridges. See page 47 for replacement
instructions.
Ink is expended in one or more of the
indicated cartridges. See page 47 for
replacement instructions.
An ink cartridge is not installed or is installed
incorrectly. See page 47 for replacement
instructions.